 |
Fenix P2D CE
provided for review by
|
 |
|
Introduction:
atl
Fenix P2D CE is a Digital Series flashlight from Fenix. With single CR123 battery, Cree XR-E LED, Body built of aluminium and hard anodize type III, water tight with O-Rings, P2D CE is very bright, strong built, good quality light. P2D CE is Microcontroller (µC) Controlled with 2 UI (User Interface) modes. In Turbo Mode the light operates with Max Brightness and Strobe. The General Mode has 3 output levels and SOS function.
atm
Light Features:
- Can run on various CR123 sized battery ranging from Primary Lithium to Li-Ion cells
- Microcontroller (µC) Controlled
- Max Output, with Strobe in Turbo Mode
- Three light output levels and SOS in General Mode
- Toughened ultra clear glass lens with AR coating
- Cree XR-E LED
- Can stand on tail
Light Operation & Output:
Turbo Mode: This mode is attained by tightening the bezel to full. It consists of Max Level [135 Lm] and Strobe. The sequence alternates in cycle.
- Press the tail cap button until 'click' sound is heard to switch ON the light
- To change Mode, in ON condition, push the tail cap button until light is off for about half a second and release for next mode. The modes will cycle through
- Press the button on tail cap until 'click' sound is heard to switch OFF the light
General Mode: This mode is attained by loosing the bezel. The General Mode consist of [9 Lm]-[40 Lm]-[80 Lm]-[SOS].
- Press the tail cap button until 'click' sound is heard to switch ON the light
- To change Mode, in ON condition, push the tail cap button until light is off for half a second and release to enter next level. The modes will cycle through
- Press the button on tail cap until 'click' sound is heard to switch OFF the light
Below is the chart showing total output levels for various AA batteries in General Mode
Fenix P2D CE |
Level |
CR123 (3v) |
Low |
65 |
Med |
286 |
High |
590 |
Max |
1020 |
Light Info:
General Info |
ID
 |
17
 |
Light Model |
P2D CE |
Manufacturer |
Fenix Light |
Review Page & Image
|
P2D CE
 |
Country |
China |
Review Date |
2007-06-12 |
Review Update |
2007-07-27 |
Light Vitals |
Length |
81 mm |
Width / Bezel Diameter |
22 mm |
Width / Tube Diameter |
20 mm |
Height (if applicable) |
mm |
Weight (without battery) |
52 gm |
Light Source |
LED Format |
Power LED |
Number of LEDs |
1 |
LED Name |
Cree XR - E |
LED Power |
3 Watts |
Light Management |
Lens Material |
Glass |
Lens Coating (if any) |
AR Coated |
Lens Transperency (typical) |
90 |
Lumen Management |
Reflector |
Material |
Aluminium Metal Smooth |
Beam Type |
Mostly Throw |
Power Management |
Converter Type |
Step Up |
Properties |
Regulated, Micro Controller (uC) |
Features |
Advanced User Interface |
Batteries Supported, Output & Runtime |
Battery Size |
Chemistry |
Nominal Voltage |
# Used |
Total Output |
Runtime to 75% |
Runtime to 50% |
Runtime to 25% |
|
CR123 | CR123 |
LiMnO2 | Li-Ion |
3 | 3.7 |
1 | 1 |
1160 | 1180 |
0 | 0 |
0 | 0 |
0 | 0 |
|
Switch Options |
Switch Type |
Switch Properties |
|
|
Body Material Options |
Material |
Properties |
Color |
|
Aluminium |
Type III Hard Anodized |
Black |
|
Light Rating |
Looks |
 | 70 |
|
Build Quality |
 | 70 |
|
Runtime |
 | 70 |
|
Output |
 | 70 |
|
Features |
 | 70 |
|
Usability |
 | 80 |
|
Bang for buck |
 | 80 |
|
Overall Rating |
 | 72.857 |
|
In-Depth Review & Pictures:
Size Comparison: From L to R: CR123 Battery, Fenix P2D CE, Peak LED Solutions McKinley

Bezel: From L to R: Fenix P2D CE, Peak LED Solutions McKinley

Body:



Body: Opened head, notice thick body wall and the tab in positive contact

Beam Shots:
Below Beam shot Matrix shows Peak LED Solutions McKinley on Left and Fenix P2D CE on Right
Extreme Closeup Pictures:




Buy Fenix P2D CE Flashlight at www.Fenix-Store.com and avail FREE Shipping Worldwide. |
|